|Your cart is currently empty|
Stainless steel and Nylon quick-release pins for securely mounting your MAXTRAX on a roof rack or bars. The set includes 4 pins which can securely hold 2 or 4 MAXTRAX. There's a hole in the top of each pin for a padlock. Designed for new MAXTRAX MKII only.
Note: Requires stainless steel 10mm washers and hardware (not inculded).
Please follow these instructions when using the MAXTRAX Mounting Pin Set
Use only 10mm Stainless Steel nuts & washers or channel nuts for channel-type bars.
Ensure all 4 pins are used for mounting.
MAXTRAX Mounting Dimensions:
Pins MUST be mounted vertically so that the MAXTRAX are carried horizontally.
Please note: You will need to trim 15mm off the thread for use in channel-type roof bars.
Ensure pins are aligned so that the padlock hole in the top 'knuckle" is visible once the MAXTRAX are locked down.
For additional security, fit a small padlock through the most easily-accessible mounting pin. A wire combination padlock is the best option (you can't lose the key and they are readily available).